[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] MicroCHP Generator Air nodes
Hello,
i need your help about an error message i can't solve :
Severe ** Invalid, Fuel Temperature Reference Node Name =
** ~~~ ** Entered in Generator:MicroCHP=COGE_GAZ
I try to use a Generator:MicroCHP. I connected the water side easily with water heater. But, i have some difficulties to connect air nodes.
It is important to notice that i have specified "scheduled" in fuel temperature modeling mode for fuel supply.
I would like to connect the air inlet node from outdoor air. Is it possible or only an exhaust air from a zone is authorized? Do i need to create an air loop with a fan to feed the microCHP? I would also like to get the air outlet to monitor the temperature?
I hope that someone have some experience of microCHP and coulf help me.
Thank you for reading.
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/