[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: total gains.!

Ask for the output variable: "Surface Int Convection Heat Rate" This is for every surface, opaque (normally walls and maybe, doors) and transparent (normally windows and sometimes glass doors).  

In addition to the above, transparent surfaces also transmit radiation. Ask for the output variable: "Window Heat Gain" and "Window Heat Loss". The sum of all the Heat Gain/Loss for all windows should is equal to the value given by the output variable "Zone Window Heat Gain/Loss"

i use new columns in the spreadhseet for summing and get percentages. 

i have used the wild key * in the Key Value field of the Output variable object. For models with more zones, i have used the Zone name in the Key Value field. In this case, the values for the other zones are not shown. 

If you want different CSV for different time aggregates (hourly, daily, monthly etc) use the RVI as shown, by way of example, in the AdvancedOutput subfolder of the ExampleFiles folder

all the best
ooi 
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Thodwris Xaritidis <maki_to_fai@...> wrote:
>
> Hello,
> 
> Is there any way of getting a passive breakdown from e+?
> I mean that I have a passive building and I need to find 
> 
> where  the heat is coming from? the windows or the walls?
> So I need to have something like total gains and the windows gains
> and check them out.
> 
> Thank you
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> ________________________________
> From: Linda Lawrie <linda@...>
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> Sent: Tuesday, 31 May 2011, 14:46
> Subject: Re: [EnergyPlus_Support] Heat Exchanger Hydronic
> 
> 
>   
> I think this is an incorrect error message and should say
> that you are missing the schedule.
> 
> Make sure you have included a schedule in the 
> Setpoint Schedule Name
> field
> 
> At 06:41 AM 5/31/2011, dgerome06 wrote:
> 
> Hi everybody,
> >I try connect a plant loop with a condenser loop thanks to Heat
> Exchanger:Hydronic in Condenser Equipment. In the plant i have set a
> ThermalStorage:ChilledWater:Mixed and in the condenser loop i have set a
> fluidcooler.
> >
> >BUt i have the following message:
> >
> >** Severe  **
> GetFreeCoolingHeatExchanger:HeatExchanger:Hydronic="EVAPORATEUR",
> Controlled Component Name="CONDENSEUR" not found.
> >
> >CONDENSEUR is the name of the fluidcooler, it is existing, so i dont
> understand how to solve this problem.
> >
> >Does someone could help me?
> >
> >Thanks
> >
> >
> >
> >------------------------------------
> >
> >Primary EnergyPlus support is found at:
> >http://energyplus.helpserve.com or send a message to
> energyplus-support@...
> >
> >The primary EnergyPlus web site is found at:
> >http://www.energyplus.gov
> >
> >The group web site is:
> >http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> >Attachments are currently allowed but be mindful that not everyone has a
> high speed connection.  Limit attachments to small files.
> >
> >EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf
> under the Documentation link and press the "search"
> button.
> >Yahoo! Groups Links
> >
> >
> EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
> >
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/