See the AuxiliaryPrograms.pdf documentation, starting on page 45 (60 absolute):
“Items shown in bold are used directly in the EnergyPlus program.”
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of nirajpoudel@xxxxxxxxx
Sent: Friday, June 10, 2011 2:28 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Customized Weather File
Dear Eplus users,
I am curious to know what fields in the weather file are mandatory for a simulation to run. Is there a bare minimum of parameters that are required from the weather file for Energyplus to run a rudimentary simulation. I.e
1) Can I do without the Extraterrestrial Horizontal, Normal and Infrared Radiation parameters, total sky cover, opaque sky cover? Can I set them all to Zero?
2) Secondly, by setting those parameters to Zero, will it severely affect the heat loss from the building at night, while using the Conduction Finite Difference algorithm?
The reason I ask these questions because I would like to model the same building with PCM in Abaqus. In order to compare the results I would like to create a very rudimentary weather file that I can input manually in Abaqus as well. Any help will be deeply appreciated.
Thanking you,
Niraj Poudel
Clemson University
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___