[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] PsyPsatFnTemp





Hello, I have some questions to ask for your help. I model a VAV with PFP Boxes system with a screw chiller provides chilled water. There are some warnings after I run the model, which are listed below: 
1) ** Warning ** Temperature out of range [-100. to 200.] (PsyPsatFnTemp)
   **   ~~~   **  Routine=PsyWFnTdbRhPb, Environment=SUMMER DESIGN DAY, at Simulation time=07/15 00:00 - 00:03
   **   ~~~   **  Input Temperature=1898.61
 
 2) ** Warning ** Enthalpy out of range (PsyTsatFnHPb)
   **   ~~~   **  Routine=Unknown, Environment=WINTER DESIGN DAY, at Simulation time=01/21 00:00 - 00:03
   **   ~~~   **  Enthalpy=327804470.59739 Pressure= 101241.00
   **   ~~~   **  Initial Resultant Temperature= 99.01
Can you tell me why these warnings occured, or how can I modify my model to avoid these warnings? Thank you!
Best wishes!
 loong


__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___