Re: [EnergyPlus_Support] Internalmass - can't find zone error

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

Used your two statements in another input file.

Appears to work fine.

At 09:37 AM 7/25/2011, Jean marais wrote:
> I get an error that it does not
> find zone PavilionN:PavilionN. Any ideas? My definition is
> below.
>
>
>
>
>
> ! PavilionN - PavilionN
> Zone,
> PavilionN:PavilionN,                       
> !- Zone Name
>   
> 0,                                            
> !- Relative North (to building)
>   
> 0,                                            
> !- X Origin (M)
>   
> 0,                                            
> !- Y Origin (M)
>   
> 0,                                            
> !- Z Origin (M)
>    1
> ,                                           
> !- Zone Type
>   
> 1,                                            
> !- Zone multiplier
>   
> ,                                             
> !- Zone ceiling height - Let EnergyPlus work it out
>   
> autocalculate,                                
> !- Zone volume
>   
> AdaptiveConvectionAlgorithm;                  
> !- Zone inside convection algorithm
>
> InternalMass,
>   PavilionN:PavilionN IM Surface, !- Surface Name 
>   1_1_7, !- Construction Name  Cast Concrete (Dense)806 -
> thickness 100 mm
>   PavilionN:PavilionN, !- Zone
>   6882 ; !- Total area exposed to Zone {m2} measured real floor area
> times 2 --> 3441 x 2
>
>
>
> ------------------------------------
>
> Primary EnergyPlus support is found at:
> http://energyplus.helpserve.com or send a message to
> energyplus-support@xxxxxxxx
>
> The primary EnergyPlus web site is found at:
> http://www.energyplus.gov
>
> The group web site is:
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> Attachments are currently allowed but be mindful that not everyone has a
> high speed connection.  Limit attachments to small files.
>
> EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf
> under the Documentation link and press the "search"
> button.
> Yahoo! Groups Links
>
> <*> To visit your group on the web, go to:
>    
>
> http://groups.yahoo.com/group/EnergyPlus_Support/
>
> <*> Your email settings:
>     Individual Email | Traditional
>
> <*> To change settings online go to:
>    
>
> http://groups.yahoo.com/group/EnergyPlus_Support/join
>     (Yahoo! ID required)
>
> <*> To change settings via email:
>     EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
>    
> EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
>
> <*> To unsubscribe from this group, send an email to:
>    
> EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
>
> <*> Your use of Yahoo! Groups is subject to:
>    
>
> http://docs.yahoo.com/info/terms/

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___