[EnergyPlus_Support] Re: Internalmass - can't find zone error

["Jean marais" <jeannieboef@xxxxxxxxx>]

Good idea. I'm going to check the expanded idf tomorrow to see if I spot anything in how it's expanding. I would have sent the expanded idf, but I'm battling a more servere problem that makes running the file take too long. I'm on the train home and will report in again tomorrow. Thanks again.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...> wrote:
>
> Used your two statements in another input file.
> 
> Appears to work fine.
> 
> At 09:37 AM 7/25/2011, Jean marais wrote:
> >I get an error that it does not find zone PavilionN:PavilionN. Any 
> >ideas? My definition is below.
> >
> >
> >
> >
> >
> >! PavilionN - PavilionN
> >Zone, PavilionN:PavilionN,                        !- Zone Name
> >    0,                                             !- Relative North 
> > (to building)
> >    0,                                             !- X Origin (M)
> >    0,                                             !- Y Origin (M)
> >    0,                                             !- Z Origin (M)
> >    1 ,                                            !- Zone Type
> >    1,                                             !- Zone multiplier
> >    ,                                              !- Zone ceiling 
> > height - Let EnergyPlus work it out
> >    autocalculate,                                 !- Zone volume
> >    AdaptiveConvectionAlgorithm;                   !- Zone inside 
> > convection algorithm
> >
> >InternalMass,
> >   PavilionN:PavilionN IM Surface, !- Surface Name
> >   1_1_7, !- Construction Name  Cast Concrete (Dense)806 - thickness 100 mm
> >   PavilionN:PavilionN, !- Zone
> >   6882 ; !- Total area exposed to Zone {m2} measured real floor 
> > area times 2 --> 3441 x 2
> >
> >
> >
> >------------------------------------
> >
> >Primary EnergyPlus support is found at:
> >http://energyplus.helpserve.com or send a message to 
> >energyplus-support@...
> >
> >The primary EnergyPlus web site is found at:
> >http://www.energyplus.gov
> >
> >The group web site is:
> >http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> >Attachments are currently allowed but be mindful that not everyone 
> >has a high speed connection.  Limit attachments to small files.
> >
> >EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf 
> >under the Documentation link and press the "search" button.
> >Yahoo! Groups Links
> >
> >
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/