Thank you for your reply,
but I can't see any value in my model.
the summary table is OK, and in the output table there are zone transmitted solar and window heat gain for each surface, which I assume heat gain from window in radiation and conduction, but I can't see the wall heat gain. Could anyone show me how with my simple modelling?
I haven't put any HVAC system in my model, because I just want to capture the external heat gain in building envelope (free floating mode).
Thank you..
Agus hOn Tue, Jul 26, 2011 at 6:48 AM, Qianmin Zhang <zqianmin@xxxxxxxxx> wrote:
I used to use output:Variable and output: Meter Outputs(.csv) to check these values, hourly.
On Mon, Jul 25, 2011 at 4:38 PM, agus hariyadi <kirpytus@xxxxxxxxx> wrote:
Dear all,
I would like to know the OTTV value of a building, OTTV is external heat gain which introduce into the building from building envelope. There are three kind of value which has to be found, solar gain from window, conduction from glass of window and conduction from wall. Is there any way for me to get this value from report?
thanks,
Agus H
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___