[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Zone/Floor Multiplier



Linda,
 
I don't find anything on the Tips and Tricks document. I am not sure why this would be, I cant search for a text "Multiplier", the results return no matching strings.
 
Could you please give me the page number in the PDF? Sorry for the trouble.
 
Vinay


On Thu, Sep 8, 2011 at 10:35 AM, Linda Lawrie <linda@xxxxxxxxxxxxxx> wrote:
 

Look at the tips and tricks doc. It has a section on multipliers. If it doesn&apos;t answer the question, tell me.



Vinay Devanathan <vinay.devanathan@xxxxxxxxx> wrote:

Mr. Dirkes,
 
Thanks for your reply.
 
I think its the other way round. There is some description on Zone Multipliers under the Zone object in the Multiplier field. It seems like the inputs should be good enough to take care of the mutiplied loads.
 
Vinay


On Wed, Sep 7, 2011 at 6:22 PM, Jim Dirkes <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
 

Dear Vinay,

 

Try reporting the airflow and fan power to see if it?s the value you specify or 7x that value.  I have not used the zone multiplier, but I?m guessing that it multiplies CFM in the same magnitude as the multiplier, so you now may have a fan at 7 x 7 = 49x.

 

The Building Performance Team
James V. Dirkes II, P.E., BEMP , LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653

 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Vinay Devanathan
Sent: Wednesday, September 07, 2011 6:04 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Zone/Floor Multiplier

 

 

Hello,

 

I am seeing very high fan power on one of my simulations and hence wanted to check for this issue.

 

Let's say there are 7 typical floors and one zone is created and a Zone Group object is used to replicate the 7 floors using a multiplier. Now in all of those zones, the zone loads will be calculated and multiplied by a factor of 7. So in order to satisfy this zone should we input the designed zone CFM * 7 in the input field for HVAC objects or input just the designed zone CFM and the software will mutliply it? It would be great if someone can clarify this.

 

I have it at 7 * designed zone cfm, and hence doubting my approach due to high fan power. At the same time I feel this is the way to do it from vague prior memory.

 

Thank you in advance.

 

Vinay

 





__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___