Re: [EnergyPlus_Support] Intermediate Building Layer Temperatures

["O. Tugrul Karaguzel" <tugrulkaraguzel@xxxxxxxxx>]

Hi Mrs. Lawrie,

I've just received your reply from the Helpdesk system. I solved crash problem when I removed the material defined as Material:InfraredTransparent.

Now I can run simulations and get CondFD Nodal Temperature values for every building surface (including glazing materials). The thing is EnergyPlus generated results for a number of nodes (which is different for each surface). For example I have a partition wall with  3 nodes reported, or a floor slab with 11 nodes reported.

I'd like to learn how E+ defines the number of nodes to be reported? Are the nodes representing mid-layer or layer-surface temperatures?

Thanks so much.

Regards.

Omer T. Karaguzel

---

From: Linda Lawrie <linda@xxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Cc: tugrulkaraguzel@xxxxxxxxx
Sent: Monday, September 26, 2011 3:02 PM
Subject: Re: [EnergyPlus_Support] Intermediate Building Layer Temperatures

 

Your file did not crash due to that.  I have already replied from the helpdesk.

At 01:00 PM 9/26/2011, O. Tugrul Karaguzel wrote:

Hi All,

My question is about EnergyPlus  output variables:
Is there are method to get surface temperature values of intermediate building layers that make up the whole envelope construction assembly ?
Normally, inside and outside temperature of building surfaces are reported. I tried to use Conduction Finite Difference (CondFD) as a surface heat balance algorithm instead of the usual CTF (Conduction Transfer Function).
According to E+ input/output reference, one of the CondFD outputs is "CondFD Nodal Temperature [C]" for each node in the surface simulated. However, E+ crashes with such input. I already send a ticket to E+ support system.
However, there may be another way of getting such a variable from E+ which I may be ignoring now.
Thanks for the replies.
Best.

Omer T. Karaguzel
PhD Candidate Carnegie Mellon University
Center for Building Performance and Diagnostics
Pittsburgh, PA, U.S.A.

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___