[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Thickness of the wall



Dear Energyplus users,

When I create a 3 foot by 3 foot box in OpenStudio and in the EnergyPlus Idf
editor create a say, 10 cm thick wall for each surface of the box. Where is the
wall created? As in,

a) Is the air volume inside 3 X 3 X3 = 27 Ft cubed

OR

b) The inside volume is 2.9 X 2.9 X 2.9 = 24.39 Ft cubed?

OR

c) The inside air volume is 2.95 X 2.95 X 2.95 = 25.67 ft cubed? (Assuming the
walls are build right in the middle)

I look forward to hearing from you guys at your earliest of convenience.

Sincerely yours'
Niraj Poudel
Clemson University




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/