[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: how the Slab program work

It depends Jean. In places with warm summers, it's worse for the cooling to put insulator in the floor. In the annual balance cooling-heating, the best result can be without insulation in the floor. For that, we would have large U-value and low resistance, and the results may be very differents using basement or slab objetc.

Regards.


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Jean marais" <jeannieboef@...> wrote:
>
> As ground temperatures are at roughly 18 deg C and conditioned zones inside are about 22 deg C AND the slab itself is quite thick with usually a large U-value, this makes for a small driving force (delta T) and a large resistance (U-value) which means  that the amount of energy exchange is small and the effect of different slab temperatures on this energy transfer is minimal.
> 
> What I'm saying is when improving simulation accuracy, the first place to start is getting more and more accurate data for input on things like people, usage and lights and the last place the slab simulation.
> 
> Unless specifically comparing slab types and behaviour, I believe the assumtion recomended by e+ of using a temperure = inside temp - 2 K, to be accurate enough.
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/