I am getting an error that I can’t
get around. I have a wall where there are 27 windows and each window causes the
same error below. I tried deleting and rebuilding the wall and windows but I
still get the same error. All the other walls in the zone give no problems. If you
can help that would be great, let me know if you need more information.
** Severe ** GetSurfaces:
Outward facing angle [270.0] of subsurface="FE9DF0" significantly
different than
** ~~~ ** ..facing angle
[90.0] of base surface=1E5242 Tilt=90.0
** ~~~ ** ..surface class
of base surface=Wall
Thanks,
Laurent Kanago
Technology
Director
Office: 312.235.2225
Fax: 773.989.8679
Cell: 312.730.2419
5030 N. Marine Dr #807
Chicago, IL 60640
“Please
consider the environment before printing this e-mail. Thank you.”
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___