[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: Help me to create the VAV system and zone





Most objects have inlet and outlets (either water or air), these are nodes. A cooling coil has entering air and leaving air, and entering water and leaving water. These are referred to as nodes: inlet air node, outlet air node, inlet water node, outlet water node.

Search the expidf file for the name of the node in the warning message and see if you can find what the error describes.

On 10/14/2011 8:32 AM, xav31sob wrote:
 

It seem to be a node problem, but I don't understand what it's mean by node ....

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "xav31sob" <rockcolomiers@...> wrote:
>
>
> I need to set up :
>
> 1)HVAC Template Thermostat
> 2) Zone VAV
> 3) System VAV
>
> ?
> Or I need something more?
>
> I have outputs to communicate with Simulink through BCVTB
>
> ^^
>


-- 
Richard A. Raustad
Senior Research Engineer
Florida Solar Energy Center
University of Central Florida
1679 Clearlake Road
Cocoa, FL  32922-5703
Phone:   (321) 638-1454
Fax:     (321) 638-1439 or 1010
Visit our web site at: http://www.fsec.ucf.edu

UCF - From Promise to Prominence: Celebrating 40 Years


__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___