Good news. Thank you!
The Building Performance Team
James V. Dirkes II, P.E., BEMP , LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Bereket Nigusse
Sent: Wednesday, October 19, 2011 7:58 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: Re: [EnergyPlus_Support] Heat Pumps and dehumidification control
CoolReheat high Relative Humidity control feature is added to unitary heat pumps in the V7 E+, which is planned for next week release.
Bereket
From: jvd2pe <jim@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Wednesday, October 19, 2011 7:51 PM
Subject: [EnergyPlus_Support] Heat Pumps and dehumidification control
Dear Forum,
I am wondering whether E+ can model a heat pump which includes a "CoolReheat" control scheme similar to that used by AirLoopHVAC:UnitaryCoolOnly.
Since there is no field in AirLoopHVAC:UnitaryHeatPump:AirToAir which allows you to specify this, I suspect the developers did not intend it.
Has anyone created a model in which CoolReheat is accomplished using a heat pump?
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___