[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Slat Angle using EMS
- To: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Subject: [EnergyPlus_Support] Re: Slat Angle using EMS
- From: "omarvelling" <laxoayi@xxxxxxxxxxxxxxxx>
- Date: Thu, 20 Oct 2011 00:31:15 -0000
- Delivered-to: mailing list EnergyPlus_Support@xxxxxxxxxxxxxxx
- Delivery-date: Wed, 19 Oct 2011 18:31:19 -0600
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=yahoogroups.com; s=lima; t=1319070678; bh=Mre8DoF1bqTdRwqbrQnSVgLlqlveW7Jb+pJEV1q4HIY=; h=Received:Received:X-Yahoo-Newman-Id:X-Sender:X-Apparently-To:X-Received:X-Received:X-Received:X-Received:X-Received:X-Received:To:Message-ID:In-Reply-To:User-Agent:X-Mailer:X-Originating-IP:X-eGroups-Msg-Info:X-Yahoo-Post-IP:From:X-Yahoo-Profile:Sender:MIME-Version:Mailing-List:Delivered-To:List-Id:Precedence:List-Unsubscribe:Date:Subject:Reply-To:X-Yahoo-Newman-Property:Content-Type:Content-Transfer-Encoding; b=c5XXmuu7WzVoIriTcQIcoVd8BlK0FT0bTPf2aNkVcEuTyxXIWZo/Vx/CTHsBdCDz9Yjah+O9eBTN49PXtplffTcaC17sPUUW+FLJj4Z1PKDlzhs1Xmw+osGRMFPl3+bD
- Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=lima; d=yahoogroups.com; b=qlgAwq2f0c5b7T3Y8gnHy5jJvhcwcaNGqAFdGkO4pbC6WLdX/bCnFYi76WIIDPkYP2j1JAQqvOknVsQmB74oQp+9mr2sH++bgtN5B8hsu5XRyo1ItTo38+dvhUB34TYP;
- Envelope-to: linda@xxxxxxxxxxxxxx
- In-reply-to: <CABzgtwqD+xXHvbjio1XA6e=8yjV7wV9QYtTJdTe=J5bgcCyiLg@mail.gmail.com>
- List-id: <EnergyPlus_Support.yahoogroups.com>
- List-unsubscribe: <mailto:EnergyPlus_Support-unsubscribe@yahoogroups.com>
- Mailing-list: list EnergyPlus_Support@xxxxxxxxxxxxxxx; contact EnergyPlus_Support-owner@xxxxxxxxxxxxxxx
- Reply-to: EnergyPlus_Support@xxxxxxxxxxxxxxx
- Sender: EnergyPlus_Support@xxxxxxxxxxxxxxx
- User-agent: eGroups-EW/0.82
Thanks Jia,
I've checked my edd file but could not find it in the list as an
actuator. The only actuator related to window shading control I can find
is the Control Status, although, as you've mentioned, I've set the
"type of slat angle for control for blinds" field of
WindowProperty:shadingControl to "scheduled slat angle". Any ideas why
this is happening? Thanks.
Omar
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Jia Hu <hujia06@...> wrote:
>
> Hi, you can use slat angle in EMS. Do you check your edd file which
should
> list it as an actuator? double check your edd file; make sure in "type
of
> slat angle for control for blinds" field of
WindowProperty:shadingControl,
> you select "scheduled slat angle" .
>
> jia
>
> On Wed, Oct 19, 2011 at 4:57 PM, omarvelling laxoayi@...wrote:
>
> > **
> >
> >
> > Hi all,
> >
> > I'm trying to control the Slat Angle of a WindowMaterial:Blind using
EMS.
> > The EMS input object I used for the actuator is:
> >
> > EnergyManagementSystem:Actuator,
> > AT_Inlet_Slat_Act, !- Name
> > AT_Inlet, !- Actuated Component Unique Name
> > Window Shading Control, !- Actuated Component Type
> > Slat Angle; !- Actuated Component Control Type
> >
> > However when I run the simulation I get the following error:
> >
> > ** Severe ** Invalid Actuated Component Control Type =SLAT ANGLE
> > ** ~~~ ** Entered in
> > EnergyManagementSystem:Actuator=AT_INLET_SLAT_ACT
> > ** ~~~ ** Control Type not found
> > ** ~~~ ** Review edd file for valid component control types.
> >
> > From what I understand and based on the EMS Application Guide page
22, I
> > can use the Slat Angle as an Actuated Component Control Type.
> > *"If the shading device is a blind, there is also a control type
called
> > "Slat Angle." This angle control is a continuous numeric value from
0.0 to
> > 180.0. The angle is defined as between the glazing system's outward
normal
> > and the slat's outward normal (see the diagram in the input output
reference
> > under WindowMaterial:Blind)".*
> >
> > Can someone please tell me why I get this error?
> >
> > Thanks
> >
> >
> >
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/