[EnergyPlus_Support] Heating/Cooling load

["amyquartette" <amyquartette@xxxxxxxxxxx>]

Dear all,

I'm modeling one apartment house with 3 different building envelopes.I would like to specify Heating and Cooling system (air condition system or radiant system)according to the performance of the building envelopes.

My questions are:
1)till now I found the HVACTemplate:Zone:IdealLoadsairSystem, is it an easy way to achieve the ideal loads air heating rate for the air condition system?

2)is there any Template for Heating/Cooling load for radiant system?

Any suggestions would be welcome.Thank you very much.



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/