[EnergyPlus_Support] Re: Water Heat Exchanger

[Mário <mneves32@xxxxxxxxx>]

Hello,

Have you thought of an hot water heater?

I don´t know if it will work.

Real the documentation hot water heater.

Best Regards

MN
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "fabiencailliau" <fabiencailliau@...> wrote:
>
> Hello all,
> 
> I'd like to create a system with 2 connected water loops :
> - a primary loop with solar collectors
> - a secondary loop with hot water baseboard heaters
> 
> The water temperature into the baseboard heaters must be between 35°C and 40°C so I cannot integrate directly them into the primary loop (which can reach 95°C).
> My idea is to connect the 2 water loops with a heat exchanger and control the temperature varying water mass flow rate.
> But I cannot find the correct model of water heat exchanger in EnergyPlus library.
> The only one which could match is the "HeatExchangerPlate" but it is dedicated to condenser loops and I cannot use it in my case.
> 
> Following issue is how to define the secondary water loop, as there is no direct heat plant into it ? It seems to be required into a water loop.
> 
> If someone has worked on similar configuration and can help me, it would be great.
> 
> Thanks you in advance.
> 
> Regards
> 
> Fabien
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/