Hi Linda, I was jumping around for joy, until I realized I have no idea which calculations this will effect. Will it effect all calculations where /m2 variables were input, e.g. lighting gains entered as watt/area will use this new zone area to calculate lighting gain?
Which calculations will not be effected?
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...> wrote:
>
> If you wait for V7 release, you will be able to input the floor areas
> you desire.
>
> There is also a tips and tricks article about wall modeling (center, etc)
>
> At 05:59 AM 10/25/2011, Jean marais wrote:
> >I've used Design Builder to generate geometry. In Design Builder you
> >must specify a width for the exterior walls and a width for interior
> >partitions.
> >
> >The architectual layouts show differing wall thicknesses, resulting
> >in a different floor area, than that of my model.
> >
> >To achieve the best geometric fit, I've set my walls as thin as
> >possible in Design Builder, listed the floor areas and volumes and
> >compared them to those of the floor plans.
> >
> >I can adjust the volume, but not the floor area in e+.
> >
> >I must justify the discrepancy to the LEED reviewers.
> >
> >How do other people deal with this? What other workflows do they use?
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/