copy the 2 schedules (cooling and heating set point temperatures) from your input file into the email so we can see them
On 11/4/2011 1:16 PM, Amruta Khanolkar wrote:
I did not make any changes in the heating setpoint schedule. I just increased the cooling setpoint schedule. So all the cooling setpoints in my new schedule are higher than the heating setpoints still it is giving me this error message,"DualSetPointWithDeadBand: Effective heating set-point higher than effective cooling set-point".Please help.Thanks,AmrutaOn Fri, Nov 4, 2011 at 6:07 AM, Richard Raustad <RRaustad@xxxxxxxxxxxx> wrote:
You increased the heating set point above the cooling set point. The cooling set point must be higher than the heating set point. Raise both temperatures.
On 11/4/2011 2:40 AM, ask_ami wrote:Hi All,
I am working on a DOE prototype building(medium office). I created a new cooling set point schedule and assigned it at Thermostatsetpoint:DualSetpoint. In the new schedule I have just increased the set point temperature in stepped pattern by total 3.3 deg. C for 3 peak hous for a peak summer day. Remaining schedule is not changed. I am running this simulation for just that peak day. But after this change I got a severe error and my simulation terminated. The error is:
-------
** Severe ** DualSetPointWithDeadBand: Effective heating set-point higher than effective cooling set-point - increase deadband if using unmixed air model
** ~~~ ** occurs in Zone=CORE_BOTTOM During Warmup, Environment=Phoenix Sky Harbor Intl Ap AZ USA TMY3 WMO#=722780, at Simulation time=06/28 00:00 - 00:10
** ~~~ ** LoadToHeatingSetPoint=-41431.055, LoadToCoolingSetPoint=-125592.948
** ~~~ ** Zone TempDepZnLd=429.02
** ~~~ ** Zone TempIndZnLd=11375.49
** ~~~ ** Zone ThermostatSetPoint=0.00
** ~~~ ** Zone HeatingSetPointOffset=0.00
** ~~~ ** Zone CoolingSetPointOffset=0.00
** Fatal ** Program terminates due to above conditions.
-------
Can somebody please explain me where did I go wrong?
Thanks,
Amruta
-- Richard A. Raustad Senior Research Engineer Florida Solar Energy Center University of Central Florida 1679 Clearlake Road Cocoa, FL 32922-5703 Phone: (321) 638-1454 Fax: (321) 638-1439 or 1010 Visit our web site at: http://www.fsec.ucf.edu UCF - From Promise to Prominence: Celebrating 40 Years
-- Richard A. Raustad Senior Research Engineer Florida Solar Energy Center University of Central Florida 1679 Clearlake Road Cocoa, FL 32922-5703 Phone: (321) 638-1454 Fax: (321) 638-1439 or 1010 Visit our web site at: http://www.fsec.ucf.edu UCF - From Promise to Prominence: Celebrating 40 Years
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___