I am not sure what is your "air heating rate".
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: nachogo27@xxxxxxxxx
Date: Thu, 10 Nov 2011 14:34:28 +0000
Subject: [EnergyPlus_Support] Problem with results of a simulation
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
As your heating load is high during the day, from 6 am, may be you are reporting some roof temperature related variables.
A 750m2 roof can be receiving 750kW of heat from the sun. (Assuming 1KW/m2.) The variation of this intensity can be found by listing the solar radiation related variables in your simulation.
If you will post or send me the IDF, I will have a look at it.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: nachogo27@xxxxxxxxx
Date: Thu, 10 Nov 2011 14:34:28 +0000
Subject: [EnergyPlus_Support] Problem with results of a simulation
Hi,
I'm having some strange results from a simulation in Energy+.
The building is composed by 2 zones,each one of 50X15(m)and a height of 5 meters.
//////////////////
/ / /
/ / /
/ 750m2 / 750m2 /
/ / /
/ / /
//////////////////
The results of "Ideal Loads Air Heating Rate" are very high,the peak is almost 750000W for each zone.The peak value occurs at 6:00am when the thermostat change the temperature target.(Almost all the days I have this peak).
The results of "Ideal Loads Air Cooling Rate" are normal, the peak is near 25000W for each zone.
I can send the files if someone needs it to help me.
Thanks
P.S.:The simulation is for Malaga(Spain)
I'm having some strange results from a simulation in Energy+.
The building is composed by 2 zones,each one of 50X15(m)and a height of 5 meters.
//////////////////
/ / /
/ / /
/ 750m2 / 750m2 /
/ / /
/ / /
//////////////////
The results of "Ideal Loads Air Heating Rate" are very high,the peak is almost 750000W for each zone.The peak value occurs at 6:00am when the thermostat change the temperature target.(Almost all the days I have this peak).
The results of "Ideal Loads Air Cooling Rate" are normal, the peak is near 25000W for each zone.
I can send the files if someone needs it to help me.
Thanks
P.S.:The simulation is for Malaga(Spain)
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___