[EnergyPlus_Support] Re: AFN cracks on partition sub-surfaces

["Jean marais" <jeannieboef@xxxxxxxxx>]

Thank you for the reply.In general I would do this.  Sometimes I split thermal zones to reflect different lighting or population profiles. In this case, it was important in seperating a regularly occupied zone from a irregularly occupied corridor for a daylighting simulation which counts compliant square footage of only regularly occupied spaces. What ever, there will be cases where zone splitting is reqired using an IR transparent "wall" with a perfectly clear "window" on it which is open to vent. The question of flow coeff. will remain to be answered for the AFN model. 



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/