[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Re: SVG Flow Chart and Nodes





There is a list in the I.O Ref. Manual, to guide you on what are the fields or nodes that can be autosized.

If you are using HVACtemplate models in IDF and try to change the fields in the expIDF, the changed number may be ignored, as the next simulation of the IDF will have a different or original expIDF again.

 

If you are changing the number using a text editor or IDFeditor, you may have changed some other objects or the order of a branch. 

 

For example, if you deleted a branch  object and insert a new object with your changed field, the order in the file is changed.  IDFeditor can only append and not insert.  This is one possible way to generate connection errors.

 

There are other possibilities, such as an extra comma in the object.

 

When you first intriduce autosize in your IDF, you may be asked for a sizing object or to do sizing run.

 

  Dr. Li  

 


To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: matthew.sverre.anderson@xxxxxxxxx
Date: Fri, 11 Nov 2011 17:06:31 +0000
Subject: [EnergyPlus_Support] Re: SVG Flow Chart and Nodes

 
I currently have a system where if I run it and have the CFM rate of the fan entered (lets say 5,000 CFM) it runs fine. However, when I try to autosize it, I get a bunch of Node Connection errors.

Is there an obvious cause of this?

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, YuanLu Li <yli006@...> wrote:
>
>
> There is node list in the .bnd file. This text format file shows all the connections as well. The SVG file can be viewed as a text file. The caption in the blocks is part of the XML listing. But the order of these listing may not be the same as those in the SVG diagram as there are coordinates associated with these captions to draw them. The .bnd listing follows your IDF ordering. Dr. Li
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx
> From: matthew.sverre.anderson@...
> Date: Fri, 11 Nov 2011 15:15:05 +0000
> Subject: [EnergyPlus_Support] SVG Flow Chart and Nodes
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hey everybody,
>
>
>
> I would like to begin by thanking everybody who has been so kind as to help me. I have a new question though. Is there anyway to get some sort of node list in the SVG viewer? Or does anybody have a good idea as to how to visualize node connections?
>




__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___