There is a LoadProfile:Plant object, but I'm not sure that's what your looking for.
On 11/16/2011 12:04 PM, Luca wrote:
Anyone?
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Luca" <cec.luca@...> wrote:
>
> Hello!
> I have to model a system that is filled with water. I have to control the water temperature. In some hours during some days, cold or warm water is added.
> I would like to model a heat sink and a heat source to add (or to subtract) the energy equivalent to the water mass added.
> Is there anyone who knows if it is possible in Energy Plus to model a heat sink and a heat internal source? (without a chiller or a electric resistance).
> Thank you.
> Luca.
>
-- Richard A. Raustad Senior Research Engineer Florida Solar Energy Center University of Central Florida 1679 Clearlake Road Cocoa, FL 32922-5703 Phone: (321) 638-1454 Fax: (321) 638-1439 or 1010 Visit our web site at: http://www.fsec.ucf.edu UCF - From Promise to Prominence: Celebrating 40 Years
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___