[EnergyPlus_Support] Re: How to model a heat sink and a heat source

["Luca" <cec.luca@xxxxxxxxx>]

Anyone?

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Luca" <cec.luca@...> wrote:
>
> Hello!
> I have to model a system that is filled with water. I have to control the water temperature. In some hours during some days, cold or warm water is added.
> I would like to model a heat sink and a heat source to add (or to subtract) the energy equivalent to the water mass added.
> Is there anyone who knows if it is possible in Energy Plus to model a heat sink and a heat internal source? (without a chiller or a electric resistance).
> Thank you.
> Luca.
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/