[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] modeling: air conditioning by air ducts & heating by radiators and boiler





Hi, I'm simulating a building house with several heating zones. Which has an air conditioning system of air ducts, a UTA for all areas.

In addition, the building has a boiler to serve the different radiators in each thermal zone.

I modeled with Unitary multizone for the cooling system, and I have put off ischedule for the AHU Heating coil, so heat coil of the UTA is off.

How I can model the building to work with radiators heating rather than heating the air and air conditioning system of air ducts.

Best regards.

Víctor Moreno Solana - Building Engineer
Building Energy Modeling & Commissioning

GestiEnergética
Sustainability Consulting
http://www.wix.com/vimores/gestienergetica

gestienergetica@xxxxxxxxx
+34 699.13.57.88

Piense antes de imprimir este e-mail, si es necesario.
          La salud del planeta está en nuestras manos.



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___