[EnergyPlus_Support] Can we model than 5 zones per floor?

[sanphawat jatupatwarangul <sanphawat@xxxxxxxxx>]

Hi 

I have attached my question and image for better discussion on multiple zone per floor. I really appreciate all thought. 

I am doing a research on building typologies to compare energy demand, embodies carbon, water, etc. from Super-tall building, high-rise, mid-rise, low-rise, to single home family in the same amount of units. I am using OpenStudio for interface and run EnergyPlus for energy simulation. I would like to set the best base line medelling strategy which will effect to all building typologies energy performance. 

ASHRAE 90.1 appendix G. has described on perimeter spaces should locate within 5 meter (15 feet). but in real building the lease space can be more than 5 meter.

 There are corridor and service core which both are different conditions and schedules. How could we possibly model just 5 zone per floor? 

 

Sanphawat 

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Attachment not found:
d:\eudora\attach\Question on multiple zone.jpg