You have very high electricity usage.
This should be removed or minimized to HVAC typical for comparison.
It will always reduce heating cost and increase cooling cost.
It can even make the building run cooling mode in Winter.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: sanphawat@xxxxxxxxx
Date: Wed, 23 Nov 2011 12:56:18 -0800
Subject: [EnergyPlus_Support] Can we model than 5 zones per floor?
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
![]()
__,_._,___
This should be removed or minimized to HVAC typical for comparison.
It will always reduce heating cost and increase cooling cost.
It can even make the building run cooling mode in Winter.
Dr. Li
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
From: sanphawat@xxxxxxxxx
Date: Wed, 23 Nov 2011 12:56:18 -0800
Subject: [EnergyPlus_Support] Can we model than 5 zones per floor?
Hi
I have attached my question and image for better discussion on multiple zone per floor. I really
appreciate all thought.
I am doing a research on building
typologies to compare energy demand, embodies carbon, water, etc. from Super-tall building, high-rise, mid-rise, low-rise, to single home family in the same amount of units. I am using OpenStudio for interface and run EnergyPlus for energy simulation. I would like to set the best base line medelling strategy which will
effect to all building typologies energy performance.
ASHRAE 90.1 appendix G. has described on perimeter spaces should locate within 5 meter (15 feet). but in real building the lease space can be more than 5 meter.
There are corridor and service core which both are different conditions and schedules. How could we possibly model just 5 zone per floor?
Sanphawat
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___