[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Model a Chiller:Electric or Chiller:Electric:EIR



By the way,can you explain how to calculate the last curve with my cooling capacity data?
Is it possible?
Thanks again,
Ignacio Gomis

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Nacho Gomis <nachogo27@...> wrote:
>
> Well,I've created the EIRFT curve too.Then I've simulated and shown
> the Chiller Evap Heat Trans Rate, Chiller Part Load Ratio, and Chiller
> Cycling Ratio.
> The operations I've done are:
> A)Divide "CHILLER:Chiller Evap Heat Trans Rate [W]" by
> "CHILLER:Chiller Part Load Ratio" when the "CHILLER:Chiller Cycling
> Ratio" is 1.
> B)Divide "CHILLER:Chiller Electric Power [W]" by "CHILLER:Chiller COP
> [W/W]" when the "CHILLER:Chiller Cycling Ratio" is 1.
> C)Look to the condenser "CHILLER:Chiller Cond Water Inlet Temp [C]"
> and "CHILLER:Chiller Evap Water Outlet Temp [C]"
> 
> With the values from C) I look up on my provider data set and check if
> A) is near to the actual operating capacity.
> With the values from C) I look up on my provider data set and check if
> B) is near to the actual compresor input rate.
> Therefore if the values are similar,my model works very similar to the
> real chiller.
> Is it OK?
> 
> Thanks so mucho for your support,
> Ignacio Gomis
> 
> P.S.:I've added the spreadsheat with the second curve and the values
> from a day of my simulation(21th of July)
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/