[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] 回复: \[EnergyPlus_Support\] how to get the total cooling load\?

Dear group,
I think the problem should be describe like that:
There is a building which external constructions and internal gains have been inputted well.
If I want to get the cooling load of design day, should only the “Sizing:Zone” and “ZoneControl:Thermostat” be filled?
And which output variables should be used to indicate the cooling load of a zone, including total, sensible and latent cooling load?
Thanks a lot!


------------------				 
Give my best wishes to you!
Respectfully yours, YunPeng Hu 胡云鹏
Huazhong University of Science and Technology 华中科技大学
Wuhan, Hubei, China
hyp@xxxxxxxxxxxxxxxxx
hyp6789@xxxxxxx
138 7123 6738
2011-12-21

-------------------------------------------------------------
发件人："Yunpeng.Hu 胡云鹏" <hyp@xxxxxxxxxxxxxxxxx>
发送日期：2011-12-21 07:56
收件人：EnergyPlus_Support
抄送：
主题：\[EnergyPlus_Support\] how to get the total cooling load\?

Dear group,
If I want to get the total cooling load of a building, which output objects should be selected?
I have used Sizing:Zone objects, and using ZoneControl:Thermostat objects, does the Zone/Sys Sensible Load Predicted[W] work?
Or how to get the design day total cooling load including sensible cooling load and latent cooling load?
Thanks a lot!

------------------				 
Give my best wishes to you!
Respectfully yours, YunPeng Hu 胡云鹏
Huazhong University of Science and Technology 华中科技大学
Wuhan, Hubei, China
hyp@xxxxxxxxxxxxxxxxx
hyp6789@xxxxxxx
138 7123 6738
2011-12-21


------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/