Dear all,
I am trying to simulate a semi-transparent photovoltaic by applying a PV generator to a window. I chose the IntgratedSurfaceOutsideFace as the Heat Transfer Integration Mode. According to the Input-Output Reference, it states that for the IntegratedSurfaceOutsideFace Mode, "The cell temperature is obtained from the outside face of the Surface:Heat Transfer named in the previous field. Energy exported by the module is removed from the heat transfer surface". I tried comparing the "Window Heat Gain Energy" and "Window transmitted Solar" for the window with and without PV and even changed the efficiency but the values remained the same. If the energy is exported from the heat transfer surface, shoudnt the heat gain and transmitted solar be lower as the PV generates more energy? Can someone help me with this? Thank you! Best Regards, Poh Khai __._,_.___ Primary EnergyPlus support is found at: http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe __,_._,___ |