[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] Re: how does E+ calculate the building total floor area?





It uses whatever the user gives as the coordinates/area for the floors.

Exterior walls do not have width, either.

At 11:31 AM 1/24/2012, Ke Xu wrote:
Thanks for your explaination, Linda.
This means that E+ sums up all floor areas enclosed by the exterial walls outer surface including area occupied by partition walls because they don't have width in the simulation?

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...> wrote:
>
>  From the Zone Field on "part of total floor area":
> Field: Part of Total Floor Area
> This optional field defaults to Yes if not specified. The field is
> used to show when a zone is
> not part of the Total Floor Area as shown in the Annual Building
> Utility Performance Summary
> tables. Specifically, when No is specified, the area is excluded from
> both the conditioned floor
> area and the total floor area in the Building Area sub table and the
> Normalized Metrics sub
> tables.
>
> Remember that walls, partitions, etc in EnergyPlus have zero width.
>
> That said, there is currently a Change Request in the developer team
> about a discrepancy in two reports that report/use floor area.
>
> At 09:06 AM 1/24/2012, Ke Xu wrote:
> >Dear all,
> >Can anyone here explain a little about how E+ calculates a
> >building's total floor area in the output report? I tried to search
> >its definition in the I/O reference, but I can't find it.
> >
> >My understanding is that it accounts for the floor area enclosed by
> >internal surfaces,so it should exclude areas occupied by internal
> >partitions, exterial walls and any vertical penetrations, such as
> >elevator shaft. As a result, this number would be different with the
> >building gross floor area defined in ASHRAE Standard 105, and
> >Standard Definitions of Building Geometry for Energy Evaluation
> >released by NREL.
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/


__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___