[EnergyPlus_Support] Re: modeling: air conditioning by air ducts & heating by radiators and boiler

[Mário <mneves32@xxxxxxxxx>]

Hello,

1 st - Set the prioraty for heating in the zone, to the radiators;
2 st - The UTA tempreture is the air tempreture passing in the system.

Best Regards 

MN

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Tooran" <t.t111ir@...> wrote:
>
> You can see RadLoHydrHeatCoolAuto.idf ,
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, gestienergetica <gestienergetica@> wrote:
> >
> > Hi, I'm simulating a building house with several heating zones. Which has an
> > air conditioning system of air ducts, a UTA for all areas.
> > 
> > In addition, the building has a boiler to serve the different radiators in
> > each thermal zone.
> > 
> > I modeled with Unitary multizone for the cooling system, and I have put off
> >  in schedule for the AHU Heating coil, so heat coil of the UTA is off.
> > 
> > How I can model the building to work with radiators heating rather than heating
> > the air and air conditioning system of air ducts.
> > 
> > Best regards.
> > 
> > Víctor Moreno Solana - Building Engineer
> > *Building Energy Modeling & Commissioning*
> > 
> > GestiEnergética
> > *Sustainability Consulting*
> > *http://www.wix.com/vimores/gestienergetica*
> > 
> > gestienergetica@
> > +34 699.13.57.88
> > 
> > *P *Piense antes de imprimir este e-mail, si es necesario.
> >           La salud del planeta está en nuestras manos.
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/