[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Max Iterations exceeded?

I've been getting messages like this a lot. Wondering if anyone could help me out (Dr Li? Anyone?)

** Warning ** SimHVAC: Maximum iterations (20) exceeded for all HVAC loops, at SDD, 06/01 08:00 - 08:06
   **   ~~~   ** SimFlags=[TFFFF] AirLoops[T],ZoneEq[F],NonZoneEq[F],PlantLoops[F],ElecCircuits[F]..F=ok,T=fail
   **   ~~~   ** HVAC Tolerance Flags=[0000000] Enthalpy[0],MassFlow[0],HumRat[0],Pressure[0],FlowQual[0],Energy[0],Temp[0]..0=ok,1=fail
   **   ~~~   ** HVAC Tolerance Values, Most Recent listed first
   **   ~~~   ** HVAC EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
   **   ~~~   **      FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
   **   ~~~   ** HVAC side outlet node=[610 - 0 CLASSROOMS RETURN AIR OUTLET]
   **   ~~~   ** HVAC EnthalpyTol=0.000, MassFlowTol=1.478E-011, HumRatTol=1.7347E-018, PressureTol=3.E-011
   **   ~~~   **      FlowQualTol=0.00, EnergyTol=3.135E-007, TempTol=3.55E-015
   **   ~~~   ** HVAC side outlet node=[609 - 5 OTHERS RETURN AIR OUTLET]
   **   ~~~   ** HVAC EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
   **   ~~~   **      FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
   **   ~~~   ** HVAC side outlet node=[608 - 5 LABS RETURN AIR OUTLET]
   **   ~~~   ** HVAC EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
   **   ~~~   **      FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
   **   ~~~   ** HVAC side outlet node=[607 - 5 CLASSROOMS RETURN AIR OUTLET]
   **   ~~~   ** HVAC EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
   **   ~~~   **      FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
   **   ~~~   ** HVAC side outlet node=[606 - 4 OTHERS RETURN AIR OUTLET]
   **   ~~~   ** Plant Tolerance Flags=[00000000] Enthalpy[0],MassFlow[0],HumRat[0],Pressure[0],FlowQual[0],Energy[0],Temp[0],PlantFlowMassFlow[0]..0=ok,1=fail
   **   ~~~   ** Plant Tolerance Values, Most Recent listed first
   **   ~~~   ** Plant EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
   **   ~~~   **      FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
   **   ~~~   ** Plant side outlet node=[337 - CHILLED WATER PLANT CNDW SUPPLY OUTLET]
   **   ~~~   ** Plant EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
   **   ~~~   **      FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
   **   ~~~   ** Plant side outlet node=[345 - CHILLED WATER PLANT CNDW DEMAND OUTLET]
   **   ~~~   ** Plant EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
   **   ~~~   **      FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
   **   ~~~   ** Plant side outlet node=[327 - CHILLED WATER PLANT CHW SUPPLY OUTLET]
   **   ~~~   ** Plant EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
   **   ~~~   **      FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
   **   ~~~   ** Plant side outlet node=[301 - HOT WATER PLANT HW SUPPLY OUTLET]
   **   ~~~   ** Plant EnthalpyTol=0.000, MassFlowTol=0.000, HumRatTol=0.0000, PressureTol=0
   **   ~~~   **      FlowQualTol=0.00, EnergyTol=0.000, TempTol=0.00
   **   ~~~   ** Plant side outlet node=[333 - CHILLED WATER PLANT CHW DEMAND OUTLET]
   **   ~~~   ** Plant Flow Tolerance Values, Most Recent listed first

I've tried changing different setpoints and messing with my schedules but nothing seems to work.  The result of this is mostly that none of my zones receive the proper cooling (all the cooling coils have a nominal capacity of 0) and I see no end uses in cooling after the simulation.



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/