Here’s an example:
You may assign heating and cooling priorities for all zone equipment.
The Building Performance Team
James V. Dirkes II, P.E., BEMP , LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653
From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of energyplus.1984
Sent: Friday, February 10, 2012 11:35 AM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Re: 2 Pipe Fan Coil Unit for Cooling + Radiant floor for heating
The I/O file also says that it will use the heating equipment priority to determine which system runs first. Can somebody elaborate on how to determine what the priority is and how to change it.
Thanks,
Shubha
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...> wrote:
>
> Read the Input Output reference on fan coil units:
>
> Specifically in there:
> Fan coil units can be 4-pipe or 2-pipe. For 4-pipe units there are 2
> supply pipes and 2 return
> pipes. For 2-pipe units there is a single supply pipe and a single
> return pipe and the supply is
> switched between hot and chilled water depending on the season. We
> model 4-pipe units, but
> the 4-pipe model can be used to model 2-pipe units by using the coil
> availability schedules to
> make sure t
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___