[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Warning Message shown as Zone XXX is not accounted for by controller:mechnicalv"



Linda,
I submitted a ticket to E+ support center with .idf file uploaded at http://energyplus.helpserve.com/index.php
Thanks for your help.
-Ke

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@...> wrote:
>
> If you send the file to the helpdesk, energyplus-support@... 
> we'll try to figure out what is going on.
> 
> At 08:06 PM 2/23/2012, Ke Xu wrote:
> >I used Notepad++ to revise idf file.
> >
> >--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "L Lawrie" <linda@> wrote:
> > >
> > > Send the file to the helpdesk and we'll try to help.
> > >
> > > You didn't make the change in IDF Editor, right?  You used 
> > Notepad or something?
> > >
> > >
> > > --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Ke Xu" <xukevin24@> wrote:
> > > >
> > > > Linda, I did the changes as you suggested, but the same warning 
> > message still pops out~~~~~~~
> > > >
> > > > Other solutions? Ideas?
> > > >
> > > > Thanks.
> > > >
> > > > --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Linda Lawrie <linda@> wrote:
> > > > >
> > > > > This is most likely a problem we need to address in the 
> > code.  However,
> > > > > I think you can get around it by (and you'll have to do this by hand,
> > > > > not in idf editor):
> > > > >
> > > > >      Perim_bot_ZN_7,          !- Zone 9 Name
> > > > >      CM DSOA Perim_bot_ZN_7,  !- Design Specification Outdoor 
> > Air Object
> > > > > Name 9
> > > > >      1,                       !- Zone Air Distribution 
> > Effectiveness in
> > > > > Cooling Mode 9 {dimensionless}
> > > > >      1,                       !- Zone Air Distribution 
> > Effectiveness in
> > > > > Heating Mode 9 {dimensionless}
> > > > >      ;                        !- Zone Air Distribution Effectiveness
> > > > > Schedule Name 9
> > > > >
> > > > > In other words, add the field for the schedule name at the end of each
> > > > > of those objects even though it is blank.
> > > > >
> > > > > IDF Editor will truncate it so you can't use IDF Editor.
> > > > >
> > > >
> > >
> >
> >
> >
> >
> >------------------------------------
> >
> >Primary EnergyPlus support is found at:
> >http://energyplus.helpserve.com or send a message to 
> >energyplus-support@...
> >
> >The primary EnergyPlus web site is found at:
> >http://www.energyplus.gov
> >
> >The group web site is:
> >http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> >Attachments are currently allowed but be mindful that not everyone 
> >has a high speed connection.  Limit attachments to small files.
> >
> >EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf 
> >under the Documentation link and press the "search" button.
> >Yahoo! Groups Links
> >
> >
> >
>



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/