[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: Modelling of air curtain.



Hello Once Again
In my opinion e+ is used as a thermal/energy modeling engine, which means that if your objective is to model the energy impact in a thermal zone of using a thermal curtain it can be done, on the other hand if the objective is to estimate the particle transportation using an air curtain I would recommend using a CFD. 
On the other hand e+ has an air flow network and maybe you could approximate the resistance of the air curtain and relate this to outside air. 
Best Regards 
MN


--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Ayzer Akguc <alpayakguc@...> wrote:
>
> Hi,
>  
> Thanks for your attention.
>  
> I would like to model air curtain for preventing dusts coming from outside.
>  
> Best regards.
> 
> Alpay Akguc
>   
> 
> ________________________________
>  From: M�¡rio <mneves32@...>
> To: EnergyPlus_Support@xxxxxxxxxxxxxxx 
> Sent: Friday, February 24, 2012 5:39 PM
> Subject: [EnergyPlus_Support] Re: Modelling of air curtain.
>   
> 
>  
>    
>  
> Hello, 
> 
> what are your objectives in simulating an air curtine?
> 
> MN
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Ayzer" <alpayakguc@> wrote:
> >
> > Hi, 
> > 
> > Is there any posibility for modelling air curtain using EnergyPlus ?
> > 
> > Best regards.
> > 
> > Alpay Akguc
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/