[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Radiant Floor Cooling result





Hello,

I am modeling chilled floor for cooling. The Radiant Cooling availability schedule has been defined to be from 8 a.m to 6 p.m. However, when I look into the variable file the Ground Floor temperature of the zone starts increasing after 9 a.m until evening. Can anyone suggest what mistake I am doing, the loop design temperature is 19°C and thermostat setpoint is 26°C. I am also using outdoor air for ventilation.

Thanks,
SACHIN SHARMA



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___
Attachment not found:
d:\eudora\attach\test chamber revised RC Complete1.idf