Santiago, I am guessing, but I think that “iteration limit exceeded” warnings occur when the system heating / cooling capacity is not great enough and also when air flow is not balanced between supply and exhaust. In your example, the load is less than zero, indicating a need for heating (-0.12331), but the system is still cooling (although at a very small rate; 3.54534E-016). Perhaps this is a cooling-only system? Or several zones are included with one system and one of them calls for heating while the others need cooling? The Building Performance Team From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of iluminasol33 Dear Forum, Primary EnergyPlus support is found at: http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx The primary EnergyPlus web site is found at: http://www.energyplus.gov The group web site is: http://groups.yahoo.com/group/EnergyPlus_Support/ Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files. EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required) Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe __,_._,___ |