I know why it happen, but i used PCM which it is necessary i put time step 20 , in out put i want to have each 30 minute for temperature.
From: Mohammad Kheradmand <mohammadkheradmand@xxxxxxxxx>
To: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Sent: Saturday, March 3, 2012 2:12 PM
Subject: Re: [EnergyPlus_Support] First time with this software
** Warning ** Timestep: Requested number (2) is less than the suggested minimum of 4.
** ~~~ ** Please see entry for Timestep in Input/Output Reference for discussion of considerations.
From: Tooran T <t.t111ir@xxxxxxxxx>
To: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Sent: Saturday, March 3, 2012 11:32 AM
Subject: Re: [EnergyPlus_Support] First time with this software
what is eror? copy it please
From: Mohammad Kheradmand <mohammadkheradmand@xxxxxxxxx>
To: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Sent: Saturday, March 3, 2012 11:49 AM
Subject: Re: [EnergyPlus_Support] First time with this software
To: "EnergyPlus_Support@xxxxxxxxxxxxxxx" <EnergyPlus_Support@xxxxxxxxxxxxxxx>
Sent: Saturday, March 3, 2012 11:49 AM
Subject: Re: [EnergyPlus_Support] First time with this software
Hello,
I try to simulate PCM by energyplus, for the out put result how i can get each 30 minute temperature (in default exit just hourly,timestep,...) because my data from experiment are each 30 minute and i want to match with them.
also one i changed timestep from 20 (for PCM ) to 2 to get that result (each 30 minute ) but i had error for it.
regards
mohammad
From: CleanTech Analytics <jeremiah@xxxxxxxxxxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Friday, March 2, 2012 10:37 PM
Subject: Re: [EnergyPlus_Support] First time with this software
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Friday, March 2, 2012 10:37 PM
Subject: Re: [EnergyPlus_Support] First time with this software
Open an exzample file and weather file using the EP launch, click simulate..
. http://www.youtube.com/watch?v=LULHjAMR4eE
email me if you need more advise..
On Fri, Mar 2, 2012 at 1:51 PM, Abel <abelalonso71@xxxxxxxxx> wrote:
This is my first day with this software. I have worked with many other ones, Trace, hap, equest, flares, flacom, you name it. I am having such a hard time to start with this software. Can some one tell me how to start a project, I am assuming that I am missing something in the installation since I already donwloaded everything and still could not find the way to start. All the previous softwares are pretty similar on their input procedure, what about this one? Thanks in advance.
Jeremiah D. Crossett
CleanTech Analytics
503-688-8951
This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics