Tooran. Your highlights don't necessarily come
through. Please restate your question/comment more
clearly.
(They can usually be seen on the website for the group, but not everyone
can view that way).
At 05:00 AM 3/3/2012, Tooran T wrote:
i wrote wrong in the
yellow highlighted line , the red line in correct
From: Tooran
<t.t111ir@xxxxxxxxx> To: EnergyPlus_Support@xxxxxxxxxxxxxxx Sent: Saturday, March 3, 2012 3:26 PM Subject: [EnergyPlus_Support] Time heating setpoint not met
dear members ,
i want to design the hot water plant loop and i wnat to know what size
pump and boiler must have to that their capacity is engough for keeping
the zone mean air temperature = 25 C ( i set heating setpoint =25C) for
winter design day , but when i run it i see in the winter design day i
have time heating setpoint not met and the zone mean air temperature is
nearly 20-21-19 C.
if i set heating setpoint =25C then i see in the winter design day the
zone mean air temperaure is nearly 24-25C .
if i set heating setpoint =30C then i see in the winter design day the
zone mean air temperaure is nearly 24-25C .
could you help me and describe it why this happens?
thanks