Re: [Bldg-sim] [EnergyPlus_Support] Experimental Data for PCM Modeling Validation

[CleanTech Analytics <jeremiah@xxxxxxxxxxxxxxxxxxxxxx>]

Saleh,

My latest data on the BioPCM technology is attached in the document called
BioPCM Energy Plus Objects. It has temperature enthalpy sets for the
following melt temperatures: Q21, Q23, Q25, Q29.
I do not yet have data on the microtek, BASF, and DuPont products, but the
microtek is not commercially available yet, and the BASF & DuPont products
can not be installed in the USA because they are a fire hazard so the
BioPCM is the defacto only commercially viable product for the USA. I have
attached a file with info on the BioPCM technology as well as an image of
the BioPCMat product..

The ramp on the Q21 is .5C/min, and the others are 1C/min, all using


WARNING: The remainder of this message has not been transferred.
The estimated size of this message is 17291454 bytes.
Click on the Retrieve From Server icon above and check mail again to get the whole thing. (If you're reading this in the preview pane, you'll need to open the message to see the icon.)  If the Retrieve From Server icon is not showing, then this message is no longer on the server.