[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [EnergyPlus_Support] best construction for PCM



if you can send to me examples can be good for me.
i have to use PCM alone, not enclosed in walls or ceiling inside the zone. no other components than pcm and steel container
i have add a non real ceiling/wall inside in each way? if i add ceiling seems to give to me an error,

thankyou
From: CleanTech Analytics <jeremiah@xxxxxxxxxxxxxxxxxxxxxx>
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Sent: Monday, March 5, 2012 11:28 PM
Subject: Re: [EnergyPlus_Support] best construction for PCM

 
BTW, 
I used material with MASS for AIR as a work around for the current version of Energy Plus bug (model does not converge  if materials no mass are used) 

On Mon, Mar 5, 2012 at 2:26 PM, CleanTech Analytics <jeremiah@xxxxxxxxxxxxxxxxxxxxxx> wrote:
Your best application depends on the PCM, could you tell me more about your project?

Due to the fire hazard issues of other PCM's in the USA, the only commercially viable product in the USA is the BioPCM product, and so that is what I have the most experience with, so I have attached files on the best configuration for the BioPCM product. 

Also I have lots more data, (example files, experimental setups, DSC etc) on BioPCM I could send you if that would be helpful?



On Mon, Mar 5, 2012 at 1:48 PM, malzuu <malzuu@xxxxxxxx> wrote:
 
Hi,
actually i'm modeling a zone with PCM.
The PCM is enclosed in square section bars packages inside the room.
Which is the best way to simulate it
Actually i'm trying with an internalmass with surface equal to 1/4 all the bars surface (with PCM thickness as bar) can be correct?




--
Jeremiah D. Crossett
CleanTech Analytics
This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics




--
Jeremiah D. Crossett
CleanTech Analytics
503-688-8951
This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics





__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.



Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___