[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [EnergyPlus_Support] Air Cooled Condenser Inlet Temperature below 0C





Liam,

Essentially the same problem as “ frost/freeze error”, discussed earlier today

 

The Building Performance Team
James V. Dirkes II, P.E., BEMP , LEED AP
1631 Acacia Drive NW
Grand Rapids, MI 49504
616 450 8653

 

From: EnergyPlus_Support@xxxxxxxxxxxxxxx [mailto:EnergyPlus_Support@xxxxxxxxxxxxxxx] On Behalf Of Liam O'Brien
Sent: Tuesday, March 20, 2012 12:51 PM
To: EnergyPlus_Support@xxxxxxxxxxxxxxx
Subject: [EnergyPlus_Support] Air Cooled Condenser Inlet Temperature below 0C

 

 

Hi All,

I've got DOAS with Fan Coil units serving each zone. I'm getting this error message for many time steps during the year for my Toronto building:

** Warning ** ElectricEIRChillerModel - CHILLER:ELECTRIC:EIR "MAIN CHILLER" - Air Cooled Condenser Inlet Temperature below 0C.

Any thoughts?

Thanks,
Liam



__._,_.___


Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.




Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___