[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[EnergyPlus_Support] Re: Classes to use to perform a simple Cooling/Heating loads simulation??
Hi Richard,
Thank you for your answer, I also checked Exercise1A.idf, and I set Schedules successfully.
I am getting confused with variable "Zone Total Internal Latent Gain" and specially comparing variables "Zone/Sys Sensible Heating Energy" and "Zone/Sys Sensible Cooling Energy" with meters "DistrictHeating:Facility" and "DistrictCooling:Facility"
I have been comparing different simulations updating "Dehumidification Control Type" and "Humidification Control Type" fields in "ZoneHVAC:IdealLoadsAirSystem" from None, ConstantSensibleRatio, ConstantSupplyHumidityRatio
I guess I should use "DistrictHeating:Facility" and "DistrictCooling:Facility" to get more realistic values but I am getting confuse considering what I am reading in the documents.
Jose
--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Richard Raustad <RRaustad@...> wrote:
>
> Yes, you are on the right track. You will also need the schedule objects
> associated with the thermostat objects. Many of the example files use
> dual set points. See GeometryTest.idf for examples of these schedules.
>
> On 3/21/2012 9:08 PM, joselecastro wrote:
> > Hi all,
> >
> > To simulate Cooling and Heating loads (considering sensible and latent loads) in a simple way without modelling a full HVAC system, do you suggest the following classes?
> > ZoneControl:Thermostat
> > ThermostatSetpoint:DualSetPoint
> > ZoneHVAC:IdealLoadsAirSystem
> > ZoneHVAC:EquipmentList
> > ZoneHVAC:EquipmentConnections
> >
> > Do you have any other suggestions?
> >
> > Thank you very much,
> >
> > Jose
> >
> >
> >
> >
> > ------------------------------------
> >
> > Primary EnergyPlus support is found at:
> > http://energyplus.helpserve.com or send a message to energyplus-support@...
> >
> > The primary EnergyPlus web site is found at:
> > http://www.energyplus.gov
> >
> > The group web site is:
> > http://groups.yahoo.com/group/EnergyPlus_Support/
> >
> > Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
> >
> > EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
> > Yahoo! Groups Links
> >
> >
> >
> >
>
> --
> Richard A. Raustad
> Senior Research Engineer
> Florida Solar Energy Center
> University of Central Florida
> 1679 Clearlake Road
> Cocoa, FL 32922-5703
> Phone: (321) 638-1454
> Fax: (321) 638-1439 or 1010
> Visit our web site at: http://www.fsec.ucf.edu
>
> UCF - From Promise to Prominence: Celebrating 40 Years
>
------------------------------------
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/EnergyPlus_Support/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/EnergyPlus_Support/join
(Yahoo! ID required)
<*> To change settings via email:
EnergyPlus_Support-digest@xxxxxxxxxxxxxxx
EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/