This document may contain valuable information proprietary to CleanTech Analytics which is private and confidential. It may not be shared, copied, stored or transmitted in any form without the prior written consent of CleanTech Analytics
Hello,
I am an MS student working on modeling a hydronically charged PCM and having some trouble getting my base model set up. I'm trying to let the system autosize as much as possible and using alot of example file inputs to hopefully get the system up and running before later refining. I am a Vertical Ground HX on the condenser loop with water to water heat pumps. I have put together my PCM constructions which will be used in the exterior walls and roof but they have not yet been applied in the file uploaded. My major issue is having heat build up in my HW loop during the warm up period. I have tried scheduling the HW loop off but it does not have any effect. I will post the file, if anyone is willing to take a look, it will be greatly appreciated.
Hydronically Charged PCM
"ConstantFlowRadiantVerticalGSHX.idf"
thanks for your consideration,
Jason
MArch+MSBE Graduate Student
Arizona State University
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___