Re: [EnergyPlus_Support] BuildingSurface:Deta iled area checking

[Linda Lawrie <linda@xxxxxxxxxxxxxx>]

It checks the area only.

It runs with the areas given.  Whether there is proper heat transfer or 
not (significant difference) is left up to the user to decide.

On 09.04.2012 14:42, Nacho Gomis wrote:
> Does it mean EPlus run the simulation without problems?Which are is
> used for the calculations?An average?
> I have used Legacy OpenStudio plug-in and sometimes it was impossible
> to pair the surfaces (the areas are were equal) and I decided to
> reduce the are which I can not pair and then I set them with
> adiabiatic boundary conditions.
> By the way,what is checked in EPlus,only the area or it checks the
> position of the surfaces?
> Thanks,
> Ignacio Gomis
>
> On 9 April 2012 21:42, Linda Lawrie  wrote:
>
> >  
> >
> > We usually "check" within 2% difference and then flag a warning.
> >
> > The simulation proceeds even with mismatched areas.
> >
> > On 09.04.2012 13:37, Cody Rose wrote:
> > > Hello,
> > >
> > > I have a question about BuildingSurface:Detailed objects. When
> > > EnergyPlus checks that "other side" surface pairs have equal
> > area,
> > > what
> > > is the tolerance for "equality?"
> > >
> > > Thanks,
> > > Cody Rose
> > >
> > >
> > > ------------------------------------
> >
> > >
> > > Primary EnergyPlus support is found at:
> > > http://energyplus.helpserve.com [1] or send a message to
> > > energyplus-support@xxxxxxxx [2]
> > >
> > > The primary EnergyPlus web site is found at:
> > > http://www.energyplus.gov [3]
> > >
> > > The group web site is:
> > > http://groups.yahoo.com/group/EnergyPlus_Support/ [4]
> > >
> > > Attachments are currently allowed but be mindful that not
> > everyone
> > > has a high speed connection. Limit attachments to small files.
> > >
> > > EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf
> > under
> > > the Documentation link and press the "search" button.
> > > Yahoo! Groups Links
> > >
> > >
> > >
>
> __._,_.___
>
>   Primary EnergyPlus support is found at:
>  http://energyplus.helpserve.com [6] or send a message to
> energyplus-support@xxxxxxxx
>
>  The primary EnergyPlus web site is found at:
>  http://www.energyplus.gov [7]
>
>  The group web site is:
>  http://groups.yahoo.com/group/EnergyPlus_Support/ [8]
>
>  Attachments are currently allowed but be mindful that not everyone
> has a high speed connection. Limit attachments to small files.
>
>  EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under
> the Documentation link and press the "search" button.
>
>  Your email settings: Individual Email|Traditional
>  Change settings via the Web [9] (Yahoo! ID required)
>  Change settings via email: Switch delivery to Daily Digest [10] |
> Switch to Fully Featured
>   Visit Your Group  [11] |  Yahoo! Groups Terms of Use  [12] |
> Unsubscribe  [13]
>
> __,_._,___
>
> Links:
> ------
> [1] http://energyplus.helpserve.com
> [2] mailto:energyplus-support%40gard.com
> [3] http://www.energyplus.gov
> [4] http://groups.yahoo.com/group/EnergyPlus_Support/
> [5] mailto:linda@xxxxxxxxxxxxxx
> [6] http://energyplus.helpserve.com
> [7] http://www.energyplus.gov
> [8] http://groups.yahoo.com/group/EnergyPlus_Support/
> [9]
>
> http://groups.yahoo.com/group/EnergyPlus_Support/join;_ylc=X3oDMTJmdDQ5ZmhiBF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA3N0bmdzBHN0aW1lAzEzMzQwMDQyMDk-
> [10]
>
> mailto:EnergyPlus_Support-digest@xxxxxxxxxxxxxxx?subject=EmailDelivery:Digest
> [11]
>
> http://groups.yahoo.com/group/EnergyPlus_Support;_ylc=X3oDMTJkN3Z2MjVmBF9TAzk3NDc2NTkwBGdycElkAzMzODc0ODgEZ3Jwc3BJZAMxNzA1MDA3Mzg5BHNlYwNmdHIEc2xrA2hwZgRzdGltZQMxMzM0MDA0MjA5
> [12] http://docs.yahoo.com/info/terms/
> [13]
>
> mailto:EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe