[EnergyPlus_Support] Warning in VRV modeling

[Javed Iqbal <eee.javed@xxxxxxxxx>]

Hi,

I am modeling VRV system for proposed case and getting following error on almost all Outdoor Unit. I tried with Increase and decrease in Temp but it didn't work. Kindly Guide me on this. Please find attached file for the same.

** Warning ** AirConditioner:VariableRefrigerantFlow "VRF HEAT PUMP (18+18+10HP)".

   **   ~~~   ** ...InitVRF: VRF Heat Pump Min/Max Outdoor Temperature in Heating Mode Limits have been exceeded and VRF system is disabled.

   **   ~~~   ** ... Outdoor Dry-Bulb Temperature                 = 18.395

   **   ~~~   ** ... Heating Minimum Outdoor Dry-Bulb Temperature = -20.000

   **   ~~~   ** ... Heating Maximum Outdoor Dry-Bulb Temperature = 17.000

   **   ~~~   ** ... Check VRF Heat Pump Min/Max Outdoor Temperature in Heating Mode limits.

   **   ~~~   **  During Warmup, Environment=PUNE ANN CLG 1% CONDNS WB=>MDB, at Simulation time=05/21 00:00 - 00:15 

 Thanks!

--

Javed Iqbal, LEED AP, CEA

Energy Analyst   

__._,_.___

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe

__,_._,___

Attachment not found:
d:\eudora\attach\VRV_Metro_Prop_130412 1.idf