Usually means the window or door is pointed in the opposite direction to the wall.
On 4/17/2012 1:38 PM, Vaibhav Jain wrote:
Hello everyone,
I get a severe warning which is from GetSurfaceData and says that - one of the subsurface has different outward facing angle than it's base surface. I have checked that both the surfaces are following the same coordinate system and starting points i.e. starting from lower left corner and going counterclockwise.
I guess its some issue related with the export I made from the latest Designbuilder's beta version.
If not, What do you think could be the problem and how to resolve it?
Thank you!
Best,
Vaibhav Jain
www.vaibhavjain.co
-- Richard A. Raustad Senior Research Engineer Florida Solar Energy Center University of Central Florida 1679 Clearlake Road Cocoa, FL 32922-5703 Phone: (321) 638-1454 Fax: (321) 638-1439 or 1010 Visit our web site at: http://www.fsec.ucf.edu UCF - From Promise to Prominence: Celebrating 40 Years
__._,_.___
Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx
The primary EnergyPlus web site is found at:
http://www.energyplus.gov
The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/
Attachments are currently allowed but be mindful that not everyone has a high speed connection. Limit attachments to small files.
EnergyPlus Documentation is searchable. Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
Change settings via the Web (Yahoo! ID required)
Change settings via email: Switch delivery to Daily Digest | Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | Unsubscribe
__,_._,___