[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] warnings

Hi everyone,

Thank you very much for the help with previous issue SketchUp and E+. All suggestions were very helpful and highly appreciated!

I am doing simulation in tropical region, but weather file is only for capital city and houses located in urban area.Therefore Eplus give me following warning:

 ** Warning ** Weather file location will be used rather than entered Location object.
   **   ~~~   ** ..Location object=KUALA BELAIT
   **   ~~~   ** ..Weather File Location=BANDAR SERI BEGAWAN - BRN IWEC Data WMO#=963150
   **   ~~~   ** ..due to location differences, Latitude difference=[0.36] degrees, Longitude difference=[0.71] degrees.
   **   ~~~   ** ..Time Zone difference=[0.0] hour(s), Elevation difference=[92.11] percent, [175.00] meters.

Do I need take it into account? If yes, any suggestions?

Second question regarding "Ground temperature".The house have the exterior floor with outside boundary condition Ground, after running simulation I've got warning:

 ** Warning ** GetSurfaces: Surfaces with interface to Ground found but no "Ground Temperatures" were input.
   **   ~~~   ** Found first in surface=15183A
   **   ~~~   ** Defaults, constant throughout the year of (18.0) will be used.

Where should I include Ground temperature, or it should be contain in weather file?

Thanks in advance.

Best regards, Veronika



------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/