[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EnergyPlus_Support] Re: EMS or Water Heater Bug ??

Thanks Jean, but I think that the calling point is correct (InsideHVACSystemIterationLoop). I have also tried with AfterPredictorAfterHVACManagers, with different results but also illogical. And the eed shows correct execution...

According to EMS guide statements must be shorter than 100 characteres (which are) so it seems that it is not the problem either.

Thanks anyway for your suggestions.

--- In EnergyPlus_Support@xxxxxxxxxxxxxxx, "Jean marais" <jeannieboef@...> wrote:
>
> If your .edd is showing the correct results, but the simulation is strange, then the calling point may be the problem. If the edd shows illogical results to your statements then the problem is probably your code. I think I remember that there may be no checking for the string lenth parsed by the program. That means statements or variable names which are too long are simply cut off with unexpected results. I may be mixing up the macro expander and the EMS parser here, sorry if I'm saying this wrong.
> 
> --- In EnergyPlus_Support@xxxxxxxxxxxxxxx, Nacho Gomis <nachogo27@> wrote:
> >
> > I havent seen your file but I had problems with the EMS controller
> > too.Which is the calling point for your EMS program?I had to set this point
> > to "InsideHVACiterations" to get it working properly.
> > I hope it can help you.
> > Ignacio Gomis
> > 
> > On 10 May 2012 20:41, ecoeficientees <ecoeficiente@> wrote:
> > 
> > > **
> > >
> > >
> > > Please, if anyone can help me...
> > > I have been trying for days to make this work, with many different
> > > variations and I find that when a Water Heater is working in the demand
> > > loop, the supply loop is not working as it should.
> > >
> > > I send a model (in Files, Problems Submittals, Azurmendi25.idf) where you
> > > can see in the edd file (EMS Debug) that condition is always taking place:
> > >
> > > HP2DESUPERHEATONOFF = 0.0
> > > SET PUMP1FLOW = 0.0
> > >
> > > However, both pump1 flow and hp2 desuperheater are working.
> > >
> > > I really don't understand. I have been trying to control flow or
> > > temperature in TANK 1 Heating supply branches through setpoint managers and
> > > EMS without logical results.
> > >
> > > Thanks in advance,
> > >
> > > Germán.
> > >
> > >  
> > >
> >
>




------------------------------------

Primary EnergyPlus support is found at:
http://energyplus.helpserve.com or send a message to energyplus-support@xxxxxxxx

The primary EnergyPlus web site is found at:
http://www.energyplus.gov

The group web site is:
http://groups.yahoo.com/group/EnergyPlus_Support/

Attachments are currently allowed but be mindful that not everyone has a high speed connection.  Limit attachments to small files.

EnergyPlus Documentation is searchable.  Open EPlusMainMenu.pdf under the Documentation link and press the "search" button.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/EnergyPlus_Support/join
    (Yahoo! ID required)

<*> To change settings via email:
    EnergyPlus_Support-digest@xxxxxxxxxxxxxxx 
    EnergyPlus_Support-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    EnergyPlus_Support-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/